HP LaserJet M521/M525 Fusing Assembly - Refurbished RM1-8508-000CN
Description / HP LaserJet M521/M525 Fusing Assembly - Refurbished RM1-8508-000CN
Product Information
HP LaserJet M521/M525 Fusing Assembly - Refurbished
Part Number: RM1-8508-000CN-RO
Condition: Refurbished Outright. No core return required.
Manufacturer / Brand: HP
Fusing assembly for HP LaserJet M521 and M525 series printers. Heat and pressure bond toner to the print media.
Technical Specifications
| Component type | Fuser / fusing assembly |
|---|---|
| Listed part number | RM1-8508-000CN-RO |
| HP service assembly reference | RM1-8508-000CN |
| Catalog revision references | RM1-8508-000CN / RM1-8508-010CN |
| Printer family | HP LaserJet Pro MFP M521; LaserJet Enterprise MFP M525 / M525c |
| Fusing method | On-demand heat and pressure |
| Replacement type | Refurbished HP assembly |
Commonly Used to Fix
These manufacturer-documented checks are suggested repair paths. M521 event codes and M525 parameterized codes have different meanings and formats; use the row for your exact printer family.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 50.x Fuser Error | Fuser error; HP documents this abbreviated control panel form without a digit-by-digit expansion here. HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.0000 | Fuser error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.1000 | Low fuser temperature error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.2000 | Slow fuser error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.3000 | High fuser temperature error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.4000 | Fuser drive circuit error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 50.7000 | Fuser open error (event log). HP LaserJet Pro MFP M521 | Switch off, wait at least 30 seconds, restart and allow initialization. If needed, switch off and wait at least 25 minutes before restarting. Remove a surge protector and connect directly to a suitable wall outlet. If the message persists, obtain service diagnosis of the fuser heater, thermistors, connectors and control circuit; replace the fuser only when its failure is confirmed. |
| 13.0000 | Paper jam (event log); this is not specific to the fuser. HP LaserJet Pro MFP M521 | Locate and remove all jammed paper and scraps. Confirm that the jam is in the fuser or delivery area before diagnosing the fuser, its guides or PS2 delivery sensor. An input-tray or document-feeder jam does not establish a faulty fuser. |
| 50.WX.YZ ? W=1 | Low fuser temperature; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Switch off, disconnect power and allow the fuser to cool before servicing. Remove and reseat the fuser. Check paper type in both the control panel and print driver. If previously serviced, check the DC-controller connection. Replace the fuser if the error persists. |
| 50.WX.YZ ? W=2 | Fuser warm-up failure; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Reconnect the fuser-to-DC-controller connector. Turn off, remove and reinstall the fuser, then replace the fuser wire harness. Replace the fuser if the fault persists. |
| 50.WX.YZ ? W=3 | High fuser temperature 1; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Switch off, disconnect power and allow the fuser to cool before servicing. Remove and reseat the fuser. Check paper type in both the control panel and print driver. If previously serviced, check the DC-controller connection. Replace the fuser if the error persists. |
| 50.WX.YZ ? W=4 | Fuser power-supply driving circuit error; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove and reseat the fuser. If previously serviced, check the DC-controller connection. Replace the fuser if the error persists. |
| 50.WX.YZ ? W=6 | Open fuser / heater-wire break; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Check that the power source meets product requirements and check the DC-controller connector after prior service. HP specifies low-voltage power-supply replacement if the fault persists; do not assume a fuser purchase will clear this code. |
| 50.WX.YZ ? W=7 | Fuser pressure-release mechanism failure; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Reseat the fuser and remove scraps. Inspect the pressure-release flag; replace the fuser if damaged. Run the manual pressure-release sensor test; replace the fuser if the sensor fails. Use the pressure-release drive/component test to check the fuser motor and replace the motor if it fails. Check the DC-controller connector after prior service; replace the fuser if the error persists. |
| 50.WX.YZ ? W=8 | Low fuser temperature 2; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Reseat the fuser and remove scraps. Check for cold drafts from vents/windows. Verify an adequate power source with the printer alone on its circuit. Inspect the fuser connector and replace the fuser if damaged. Check the DC-controller connector after prior service, then replace the fuser if the fault persists. |
| 50.WX.YZ ? W=9 | High fuser temperature 2; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Reseat the fuser and remove scraps. Check for cold drafts from vents/windows. Verify an adequate power source with the printer alone on its circuit. Inspect the fuser connector and replace the fuser if damaged. Check the DC-controller connector after prior service, then replace the fuser if the fault persists. |
| 50.WX.YZ ? W=A | High fuser temperature 2; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Reseat the fuser and remove scraps. Check vents/windows, power requirements, exclusive circuit use and fuser connector damage. Replace the fuser if its connector is damaged. Check the DC-controller connector after prior service; replace the fuser if the fault persists. |
| 50.WX.YZ ? W=B | High fuser temperature 3; W identifies the fault, X the fuser mode, and Y/Z the previous/next sleep states. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Switch off, disconnect power and allow the fuser to cool before servicing. Remove and reseat the fuser. Check paper type in both the control panel and print driver. If previously serviced, check the DC-controller connection. Replace the fuser if the error persists. |
| 13.B9.FF | Residual paper holds the fuser-output sensor active at power-on. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the paper path, check media specifications and test PS2 using Manual Sensor Test. Replace the fuser only if PS2 is not working. For the sensor test, open the rear door, slowly insert paper to actuate PS2, and check for a control panel response. |
| 13.B9.A2 | Fuser delivery stay jam; Normal fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the rear-door path and all scraps, verify suitable media, and check PS2. Inspect fuser delivery guides and rollers; clean contamination and replace the fuser when a guide, delivery roller, film, pressure roller or PS2 flag is confirmed damaged or defective. |
| 13.B9.A3 | Fuser delivery stay jam; Light 1/2 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the rear-door path and all scraps, verify suitable media, and check PS2. Inspect fuser delivery guides and rollers; clean contamination and replace the fuser when a guide, delivery roller, film, pressure roller or PS2 flag is confirmed damaged or defective. |
| 13.B9.A4 | Fuser delivery stay jam; Heavy 1 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the rear-door path and all scraps, verify suitable media, and check PS2. Inspect fuser delivery guides and rollers; clean contamination and replace the fuser when a guide, delivery roller, film, pressure roller or PS2 flag is confirmed damaged or defective. |
| 13.B9.A5 | Fuser delivery stay jam; Heavy 2 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the rear-door path and all scraps, verify suitable media, and check PS2. Inspect fuser delivery guides and rollers; clean contamination and replace the fuser when a guide, delivery roller, film, pressure roller or PS2 flag is confirmed damaged or defective. |
| 13.B9.AB | Fuser delivery stay jam; Overhead transparency fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Clear the rear-door path and all scraps, verify suitable media, and check PS2. Inspect fuser delivery guides and rollers; clean contamination and replace the fuser when a guide, delivery roller, film, pressure roller or PS2 flag is confirmed damaged or defective. |
| 13.B9.D1 | Fuser delivery delay jam from Tray 1. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove all paper and scraps; verify media specifications. Test PS2 and replace the fuser if the sensor fails. If PS2 works and the error occurs only during duplexing with paper before the fuser and one side fused, HP specifies the pendulum assembly RM1-6598-000CN instead. |
| 13.B9.D2 | Fuser delivery delay jam from Tray 2. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove all paper and scraps; verify media specifications. Test PS2 and replace the fuser if the sensor fails. If PS2 works and the error occurs only during duplexing with paper before the fuser and one side fused, HP specifies the pendulum assembly RM1-6598-000CN instead. |
| 13.B9.D3 | Fuser delivery delay jam from Tray 3. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove all paper and scraps; verify media specifications. Test PS2 and replace the fuser if the sensor fails. If PS2 works and the error occurs only during duplexing with paper before the fuser and one side fused, HP specifies the pendulum assembly RM1-6598-000CN instead. |
| 13.B9.D4 | Fuser delivery delay jam from Tray 4. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove all paper and scraps; verify media specifications. Test PS2 and replace the fuser if the sensor fails. If PS2 works and the error occurs only during duplexing with paper before the fuser and one side fused, HP specifies the pendulum assembly RM1-6598-000CN instead. |
| 13.B9.DD | Fuser delivery delay jam from Duplexer. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove all paper and scraps; verify media specifications. Test PS2 and replace the fuser if the sensor fails. If PS2 works and the error occurs only during duplexing with paper before the fuser and one side fused, HP specifies the pendulum assembly RM1-6598-000CN instead. |
| 13.B9.C2 | Paper wrapped around the fuser; Normal fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove jammed paper after the fuser cools. Verify media type/size in the tray settings and print driver. Use suitable preprinted media, transparencies and labels; do not reuse labels or expose adhesive. HP specifies fuser replacement if the wrapping fault remains. |
| 13.B9.C3 | Paper wrapped around the fuser; Light 1/2 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove jammed paper after the fuser cools. Verify media type/size in the tray settings and print driver. Use suitable preprinted media, transparencies and labels; do not reuse labels or expose adhesive. HP specifies fuser replacement if the wrapping fault remains. |
| 13.B9.C4 | Paper wrapped around the fuser; Heavy 1 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove jammed paper after the fuser cools. Verify media type/size in the tray settings and print driver. Use suitable preprinted media, transparencies and labels; do not reuse labels or expose adhesive. HP specifies fuser replacement if the wrapping fault remains. |
| 13.B9.C5 | Paper wrapped around the fuser; Heavy 2 fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove jammed paper after the fuser cools. Verify media type/size in the tray settings and print driver. Use suitable preprinted media, transparencies and labels; do not reuse labels or expose adhesive. HP specifies fuser replacement if the wrapping fault remains. |
| 13.B9.CB | Paper wrapped around the fuser; Overhead transparency fuser mode. HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Remove jammed paper after the fuser cools. Verify media type/size in the tray settings and print driver. Use suitable preprinted media, transparencies and labels; do not reuse labels or expose adhesive. HP specifies fuser replacement if the wrapping fault remains. |
| 10.23.15 | Fuser kit missing or incorrectly installed HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Install the correct assembly or fully reseat it. Allow cooling before handling. |
| 10.23.35 | Incompatible fuser kit HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Confirm the exact printer model and install its correct fuser assembly. |
| 10.23.70 | Fuser kit very low / printing past very low HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Replacement is advised when print quality is no longer acceptable. The threshold alone does not require immediate replacement; actual remaining life varies. |
| Install Fuser Unit | Fuser absent or incorrectly installed HP LaserJet Enterprise MFP M525 / Enterprise flow MFP M525c | Allow the hot fuser to cool and reseat it. Install the correct assembly if missing. |
Other Symptoms This Part May Fix
- Loose toner: Check paper side, media quality and room conditions. For a dirty pressure roller, scratched film or foreign material on the film, run the fuser test and replace the fuser if the defect persists.
- Dropouts, vertical lines or horizontal lines: Check media, transfer components and the toner cartridge. Clean the paper path and fuser inlet guide. Scratched or contaminated fuser film is a documented replacement cause after diagnosis.
- Repeating defects / ghosting: Measure the spacing: 76 mm identifies the fuser film and 79 mm the pressure roller; cartridge and transfer-roller repeats use other distances. Run a cleaning page and the fuser test before replacement. Check preprinted media and configured paper type for repeating images.
- Specks or toner smear: Try clean media, print a few pages, clean the interior and run a cleaning page. Check the cartridge for leaks and inspect feed rollers and guides. Replace the fuser only when the defect is traced to its pressure roller or film.
- Rear-door jams on M525: Check the fuser inlet and delivery guides, delivery roller and PS2 flag. Clean dirt or toner buildup, reseat connectors, and replace the fuser for confirmed scratches, deformation or failed integral PS2 sensing.
Maintenance / Replacement Cycle
M521 cleaning: Setup > Service > Cleaning Page. Load plain Letter or A4 paper when prompted, touch OK, wait for completion and discard the printed page.
M525 cleaning: Device Maintenance > Calibration/Cleaning > Cleaning Page > Print. For automatic cleaning, open Cleaning Settings, enable Auto Cleaning and select the interval and paper size.
Clean the paper path and cartridge area when changing the toner cartridge or when image-quality problems occur. Replace a diagnosed worn or failed assembly; no fixed page yield is promised. Disconnect the power cable and allow the fuser to cool before service.
Used In Products
Warranty
90 days, provided by seller
Manufacturer Manual Reference
HP M521 service documentation references manufacturer part number RM1-8508-000CN (PDF page 173). Verify the printer configuration and the part number before ordering.
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | RM1-8508-000CN-RO |
| OEM Part Number | RM1-8508-000CN |
| Alternate Part Numbers | RM1-8508-000CN, RM1-8508-010CN |
| Weight | 6.000000 |