HP LaserJet M600 Series Fuser Assembly Exchange RM1-8395-000CN

PLEASE NOTE: This item is sold on an exchange basis.

In stock

Only 10 left

Part Number
RM1-8395-000CN-RX
$79.00

Description / HP LaserJet M600 Series Fuser Assembly Exchange RM1-8395-000CN

Product Information

HP RM1-8395-000CN-RX 110 V Fuser Assembly - Refurbished Exchange

Part Number: RM1-8395-000CN-RX

Condition: Refurbished Exchange. Defective core return required.

Manufacturer / Brand: HP

Refurbished 110 V fuser assembly for HP LaserJet Enterprise 600 M601, M602 and M603 printers. Applies controlled heat and pressure to bond toner to paper. Match the printer voltage before ordering.

Technical Specifications

Listed part numberRM1-8395-000CN-RX
Component typeFuser assembly
Voltage110 V
HP service referenceRM1-8395 / CE988-67901 (110 V)

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
10.23.15Fuser kit missing or installed incorrectly.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Allow the fuser to cool, check that the correct-voltage assembly is fitted and seated, then install or replace the fuser if it is missing or faulty.
10.23.35Installed fuser is incompatible.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Confirm the exact printer and voltage. Install the correct compatible fuser; this is not a reason to fit a different-voltage unit.
10.23.60Fuser-kit life warning; remaining usable life varies.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Check print quality. This message alone does not require immediate replacement. Replace the fuser when quality or service diagnosis warrants it.
10.23.70Fuser-kit life warning; remaining usable life varies.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Check print quality. This message alone does not require immediate replacement. Replace the fuser when quality or service diagnosis warrants it.
50.22.00Fuser warm-up fault.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Restart the printer; check correct-voltage wall power, firmware, paper settings and fuser seating. Replace a diagnosed failed fuser; persistent faults also require power-supply checks.
50.22.11Fuser warm-up fault.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Restart the printer; check correct-voltage wall power, firmware, paper settings and fuser seating. Replace a diagnosed failed fuser; persistent faults also require power-supply checks.
50.WX.YZ (W = 2)Warm-up failure. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
With power off, check J128 and reseat the fuser. Replace the fuser if the fault persists; investigate the low-voltage power supply if replacement does not resolve it.
50.WX.YZ (W = 3)Thermistor 1 temperature too low. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Reseat the fuser and inspect J128. Replace the fuser for connector damage or a confirmed fuser fault. Check DC-controller J82 and the power supply if the error persists.
50.WX.YZ (W = 4)Thermistor 1 temperature too high. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Reseat the fuser, inspect J128 and check DC-controller J82. Replace a failed fuser; a persistent fault can require power-supply diagnosis.
50.WX.YZ (W = 10)Thermistor 2 temperature too low. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Inspect fuser seating and J128; replace the fuser if its connector is damaged. Check power-supply J62 and diagnose the power supply if the fault persists.
50.WX.YZ (W = 11)Thermistor 2 temperature too high. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Inspect fuser seating and J128; replace the fuser if its connector is damaged. Check power-supply J62 and diagnose the power supply if the fault persists.
50.WX.YZ (W = 12)Fuser pressure-release mechanism fault. HP documents this variable pattern; X is fuser mode and Y/Z are sleep states.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Inspect J128, the pressure-release sensor flag and related controller connections. Replace the fuser for a damaged flag. Check J221/J89 and component-test the separate fuser motor; replace a failed motor before condemning the fuser.
13.B9.AzFuser-area jam. HP documents this pattern with a variable z suffix.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Turn off and unplug the printer; let the fuser cool. Remove trapped or torn paper without sharp tools and reseat the fuser. Check media and the fuser delivery sensor before replacing a damaged or failed fuser.
13.B9.BzFuser-area jam. HP documents this pattern with a variable z suffix.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Turn off and unplug the printer; let the fuser cool. Remove trapped or torn paper without sharp tools and reseat the fuser. Check media and the fuser delivery sensor before replacing a damaged or failed fuser.
13.B9.DzFuser-area jam. HP documents this pattern with a variable z suffix.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Turn off and unplug the printer; let the fuser cool. Remove trapped or torn paper without sharp tools and reseat the fuser. Check media and the fuser delivery sensor before replacing a damaged or failed fuser.
13.WX.YZ - Fuser Area JamService-manual variable pattern for a fuser-area jam.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Clear paper, check media specifications, inspect for fuser obstructions and verify the Tray 2 roller is correctly installed. Diagnose the fuser delivery sensor; replace the fuser only when its mechanism or sensor has failed.
13.WX.YZ - Fuser wrap jamService-manual variable pattern for paper wrapping in the fuser.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Power off and allow cooling before clearing wrapped paper. Check media, obstructions and fuser damage. A damaged fuser may need replacement; a jam message alone does not prove fuser failure.
13.FF.FFResidual paper detected at power-on or door close. The event log uses the variable pattern 13.WX.FF; the display can show 13.FF.FF.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Clear all paper first. Use the manual sensor test to isolate the affected sensor. If fuser delivery sensor PS700 fails its test, replace the fuser; faults at other sensors require their own diagnosis.
13.WX.FFResidual paper detected at power-on or door close. The event log uses the variable pattern 13.WX.FF; the display can show 13.FF.FF.
HP LaserJet Enterprise 600 M601 / M602 / M603.
Clear all paper first. Use the manual sensor test to isolate the affected sensor. If fuser delivery sensor PS700 fails its test, replace the fuser; faults at other sensors require their own diagnosis.

Other Symptoms This Part May Fix

  • Persistent dropouts: Check media and environment first. Use a Print/Stop test to isolate image formation. A fuser with an incorrect pressure-roller nip can require replacement.
  • Vertical white lines: After checking media and the cartridge, inspect the fuser sleeve for scratches. Replace a damaged fuser; a contaminated scanner can cause a similar defect.
  • Smears or repeating marks: Run the documented cleaning procedure and check media and the cartridge before replacing a fuser. These symptoms are not a unique fuser diagnosis.

Used In Products

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number RM1-8395-000CN-RX
OEM Part Number RM1-8395-000CN
Alternate Part Numbers RM1-8395-000CN, CE988-67901, CE988-69001, CE988-67914, RM1-8395-270CN
Weight 6.000000
Write Your Own Review
You're reviewing: HP LaserJet M600 Series Fuser Assembly Exchange RM1-8395-000CN

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA