HP LaserJet 2400 Fusing Assembly RM1-1535-000CN Refurbished
Description / HP LaserJet 2400 Fusing Assembly RM1-1535-000CN Refurbished
Product Information
HP RM1-1535-000CN-RO Fuser Assembly - Refurbished Outright
Part Number: RM1-1535-000CN-RO
Condition: Refurbished Outright. No core return required.
Manufacturer / Brand: HP
110-127 V fusing assembly for HP LaserJet 2410, 2420 and 2430 series printers. The fuser fixes the toner image onto the paper.
Technical Specifications
| Component type | Fuser / fusing assembly |
|---|---|
| HP assembly reference | RM1-1491-000CN |
| Electrical rating | 110-127 V |
| Printer family | HP LaserJet 2410 / 2420 / 2430 series |
| Function | Fuses the toner image onto the print media |
Commonly Used to Fix
These are suggested repair paths. Wiring, connectors, the engine controller or the power supply can also cause a fuser error.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 50.1 FUSER ERROR | Low fuser temperature HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 50.2 FUSER ERROR | Fuser warm-up service error HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 50.3 FUSER ERROR | Fuser over-temperature HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 50.4 FUSER ERROR | Faulty fuser HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 50.5 FUSER ERROR | Incorrect fuser installed HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 50.6 FUSER ERROR | Open fuser circuit HP LaserJet 2410, 2420 and 2430 series. | Turn the printer off and back on. If the error persists, switch it off and allow the fuser to cool. Verify the correct printer model and voltage, reinstall the fuser, and inspect its connection; replace a damaged connector. If the fault persists, replace the correct fuser. If replacement does not resolve it, continue with the ECU and then power-supply diagnosis. |
| 13.XX.YY JAM IN <Location> | Location-dependent paper jam. This is the abbreviated form documented for the HP LaserJet 2400 series; it is not a unique fuser diagnosis. | Clear jammed media and check for a stuck or broken sensor. For wrinkles or folds specifically at the paper-path exit, inspect the fuser inlet guide and pressure roller. A dirty inlet guide or a damaged pressure roller can require fuser replacement; clean the pressure roller using cleaning pages first where appropriate. Do not replace the fuser for an unrelated input-tray jam. |
Other Symptoms This Part May Fix
- Toner smears or rubs off: check media type, environment and fuser-mode settings, run a cleaning page and check the print cartridge. Replace the fuser if it is defective; an ECU fault can also be responsible.
- Wrinkles or folds at the paper-path exit: inspect the fuser inlet guide and pressure roller. Run cleaning pages for a dirty pressure roller and replace the fuser if the condition persists or the roller is damaged.
- Vertical white lines: check the media and print cartridge and inspect the laser/scanner path first. A defective fuser is one documented possible cause.
- Tire-track marks: inspect the print cartridge and run a cleaning page. If the defect persists, the fuser is one documented replacement path; other contamination or paper-path damage must also be checked.
- Specks or repeating marks from fuser contamination: run the printer cleaning page. Repeating marks can also come from the print cartridge or other rotating components.
Maintenance / Replacement Cycle
HP recommends running the cleaning page when the print cartridge is replaced, or at a configured automatic cleaning interval. Use copier-grade paper. On duplex models, open the rear output bin before cleaning.
Control panel: CONFIGURE DEVICE > PRINT QUALITY > CREATE CLEANING PAGE, then follow the printed instructions. Close the rear output bin afterward on duplex models.
Check the configured media type and fuser mode before diagnosing poor adhesion. Incorrectly high fuser settings can increase curl. Disconnect power before servicing and allow the fuser to cool.
Used In Products
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | RM1-1535-000CN-RO |
| OEM Part Number | RM1-1535-000CN |
| Alternate Part Numbers | RM1-1535-030CN, RM1-1535-090CN, RM1-1535-080CN, RM1-1535-000CN, RM1-1491-000CN |
| Weight | 2.800000 |