4250 Solenoid (Rk2-0270)

All items come with standard warranty of 90 days, warranty provided by seller.

In stock

Only 10 left

Part Number
RK2-0269-000CN-RO
$10.00

Description / 4250 Solenoid (Rk2-0270)

Product Information

HP RK2-0269-000CN Tray 2 Pickup Solenoid SL101 - Refurbished Outright

Part Number: RK2-0269-000CN-RO

Condition: Refurbished Outright. No core return required.

Manufacturer / Brand: HP

Pickup solenoid SL101 for Tray 2. Match the exact part and pickup position before ordering. Diagnosis must distinguish a failed solenoid from worn rollers, sensing faults or a damaged pickup mechanism.

Technical Specifications

Listed part numberRK2-0269-000CN-RO
ComponentTray 2 pickup solenoid
HP service referenceRK2-0269-000CN
Solenoid designationSL101
4250/4350 diagnostic connectionJ92 at the DC controller; approximately 110 ohms on the cable side
Printer familiesHP LaserJet 4240n / 4250 / 4350; HP LaserJet M4345 MFP
HP documented replacement directionRK2-0269-000CN is replaced by RK2-0270-000CN; this listing retains the offered RK2-0269 reference.

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
13.01.00Media did not arrive at the pre-feed sensor PS102 within the specified time.
HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101.
Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis.
13.03.00Media did not arrive at the top-of-page sensor PS103 within the specified time.
HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101.
Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis.
13.XX.YY JAMManufacturer grouped pickup/feed jam pattern; apply only to a fault isolated to this solenoid.
HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101.
Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis.

Other Symptoms This Part May Fix

  • Pickup timing or actuation failure traced to Tray 2 solenoid SL101: On the 4250/4350, follow the manufacturer J92 cable-side resistance test after inspecting rollers, wiring and the actual pickup mechanism. On the M4345 MFP, this solenoid activates the corresponding pickup roller; use Administration > Troubleshooting > Component Test to observe or listen to the selected component. A feed-roller clutch, worn roller, sensing fault or damaged drive requires its own repair. Do not replace this solenoid solely because a paper-jam message appears.

Used In Products

HP LaserJet 4240n
HP LaserJet 4250 series
HP LaserJet 4350 series
HP LaserJet M4345 MFP

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number RK2-0269-000CN-RO
OEM Part Number RK2-0269-000CN
Alternate Part Numbers RK2-0269-000CN, RK2-0270-000CN, RH7-5354-000CN, RH7-5355-000CN, RM1-5054-000CN
Weight 0.500000
UPC/EAN 4053162857971
Write Your Own Review
You're reviewing: 4250 Solenoid (Rk2-0270)

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA