1500-Sheet High Capacity Paper Input Tray

All items come with standard warranty of 90 days, warranty provided by seller.

Out of stock

Part Number
Q2444B-RO
$190.00

Description / 1500-Sheet High Capacity Paper Input Tray

Product Information

HP Q2444B 1,500-Sheet Paper Feeder - Refurbished Outright

Part Number: Q2444B-RO

Condition: Refurbished Outright. No core return required.

Manufacturer / Brand: HP

Optional 1,500-sheet paper tray and feeder for HP LaserJet 4250 / 4350 printers. Match the exact Q2444B accessory and installed configuration. Diagnose an individual roller, sensor or drive fault before replacing the complete unit.

Technical Specifications

Listed part numberQ2444B-RO
Component1,500-sheet input tray and feeder
HP product referenceQ2444B
HP service referenceQ2444-67902
CapacityUp to 1,500 sheets of 75 g/m2 (20 lb) paper; varies with media and conditions
Supported mediaLetter, A4 and Legal; 60-120 g/m2 (16-32 lb)
Sensing/lift mechanismsSR3 paper-out sensing; SR2 stack-position sensing; SW1 size detection; M1 lift motor
Electrical designReceives +24 Vdc from the printer; feeder circuitry generates +3.3 V internally

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
INSERT OR CLOSE TRAY XXThe indicated input tray must be inserted or closed.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Close and correctly seat the indicated feeder. If the message persists, inspect SW1 and ensure the tray sensing fingers engage correctly; print a configuration page. Repair the confirmed damaged sensing or mechanical component before considering a complete accessory replacement.
LOAD TRAY XX <TYPE> <SIZE>The indicated tray is empty or its configured media differs from the job.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Load the requested supported paper and check the configuration page. If correctly loaded paper is still reported with the wrong size, check SW1 for this feeder. An empty tray or job/configuration mismatch is corrected by loading/settings, not replacing the accessory.
SIZE MISMATCH IN TRAY XXPaper length and tray configuration disagree.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Verify the actual paper format and adjust the feeder guides for supported Letter, A4 or Legal paper. Compare the configuration page with the actual tray. If the indication persists despite correct loading and guide position, check the feeder size-sensing mechanism SW1 and its mechanical engagement. A damaged sensor/guide mechanism requires its own repair; a normal setup prompt does not prove the complete feeder is defective. If the size sensor is faulty, the manufacturer directs its replacement, then the indicated feeder-control PCA and finally the printer DC controller if earlier corrections fail.
TRAY XX EMPTY <TYPE> <SIZE>The indicated tray is empty, or its paper-out indication is incorrect.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Refill the feeder first. If the indication persists with correctly loaded media, test the 1,500-sheet feeder paper-out sensor SR3 and its sensing mechanism. Do not confuse SR3 paper-present detection with SR2 stack-height sensing or SW1 media-size sensing.
TRAY XX OPENThe indicated tray is open or incompletely closed.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Close the feeder door correctly. If the indication persists, check SW1 and engagement of the tray sensing fingers. Repair a damaged latch/engagement or sensing component only after confirming it; a door left open does not require a new feeder.
TRAY XX SIZE= <XXXX SIZE>A size/configuration prompt or guide position that needs verification.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Verify the actual paper format and adjust the feeder guides for supported Letter, A4 or Legal paper. Compare the configuration page with the actual tray. If the indication persists despite correct loading and guide position, check the feeder size-sensing mechanism SW1 and its mechanical engagement. A damaged sensor/guide mechanism requires its own repair; a normal setup prompt does not prove the complete feeder is defective.
TRAY XX <TYPE> <SIZE> Size detected by trayThe printer reports the size/type detected for the tray.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Verify the actual paper format and adjust the feeder guides for supported Letter, A4 or Legal paper. Compare the configuration page with the actual tray. If the indication persists despite correct loading and guide position, check the feeder size-sensing mechanism SW1 and its mechanical engagement. A damaged sensor/guide mechanism requires its own repair; a normal setup prompt does not prove the complete feeder is defective.
13.01.00Media did not arrive at PS102 in time; confirm the fault originates in this feeder.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Clear the actual jam and check paper-out sensing, then clean the pickup/feed/separation rollers and replace worn or damaged rollers as directed. Inspect SR2 stack-position sensing, pickup solenoid and the feeder pickup/lifter mechanisms. Correct connectors or damaged drive components separately. The manufacturer lists feeder-control PCA and printer DC-controller faults as further alternatives; replacing this accessory cannot repair a printer-side sensor or controller.
13.03.00Media did not arrive at PS103 in time; this can involve pickup/feed or a printer-side fault.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Use HELP and locate the paper leading edge. Check correct loading, paper-out sensing, worn pickup/feed/separation rollers and the stack-position/lift mechanism. For a jam isolated to this feeder, follow its pickup-drive, solenoid, connector, lifter and PCA checks. PS103 or printer DC-controller faults require separate printer repair. Do not replace a working feeder for a downstream printer fault.
13.XX.YY JAMManufacturer grouped pickup/feed jam pattern; only a jam traced to this accessory is relevant.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Clear media and inspect the feeder rollers and drive gears. Replace dirty-after-cleaning, worn or damaged rollers; repair damaged gears or a failed pickup drive. Inspect the printer connection. For the 4250/4350 feeder pickup solenoid, disconnect its connector at the feeder PCA and check approximately 110 ohms on the cable side. Check the lifter, SR2 stack sensor and feeder PCA, preserving the printer DC-controller alternative. These are component service paths; the full accessory is an alternative only when its own hardware fault is confirmed.
60.3Tray 3 lifter-motor failure; this row applies when Tray 3 is this 1,500-sheet feeder.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Turn printer power off and on. If the error persists, power off and fully seat the lifter wire harness at the feeder PCA. The manufacturer then directs the correct 1,500-sheet lifter-drive replacement, followed by that feeder controller PCA. Check SR2 and lift mechanics if pickup/lifting symptoms remain. Do not substitute the separate 500-sheet lifter or the internal Tray 2 lifter.
60.4Tray 4 lifter-motor failure; this row applies when Tray 4 is this 1,500-sheet feeder.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Power-cycle the printer. If the error persists, power off and reseat the lifter wire harness at the feeder PCA. Follow the correct 1,500-sheet lifter-drive and then feeder-controller PCA replacement steps. Verify the actual tray location and component; this is a component diagnostic path, not proof that all parts of the accessory need replacement.
56.1An unknown input device is installed.
HP LaserJet 4250 / 4350 with the exact Q2444B 1,500-sheet feeder; verify the indicated tray.
Turn power off and on and reinstall the input trays. Remove non-HP paper-handling devices. Match the exact genuine supported accessory and check correct installation. This message does not by itself diagnose failed feeder hardware or direct complete feeder replacement.

Other Symptoms This Part May Fix

  • Paper does not lift or pickup/feed jams repeat in this feeder: Clear debris and inspect the pickup/feed/separation rollers first. Clean or replace confirmed worn rollers, inspect damaged drive gears and connectors, and test the pickup solenoid. If the lift plate does not rise correctly, check the lifter-drive mechanism and SR2 stack-position sensor; the feeder PCA is another separate cause. When the front door is opened, the plate lowers under its own weight as the gears disengage; that normal action is not a failed lift motor.

Used In Products

HP LaserJet 4250 series
HP LaserJet 4350 series

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number Q2444B-RO
OEM Part Number Q2444B
Alternate Part Numbers Q2444B
Weight 35.000000
UPC/EAN 829160306124
Write Your Own Review
You're reviewing: 1500-Sheet High Capacity Paper Input Tray

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.