Lj 9000/9040/9050 Fusing Assembly-Exchange C8519-69035
Description / Lj 9000/9040/9050 Fusing Assembly-Exchange C8519-69035
Product Information
Lj 9000/9040/9050 Fusing Assembly-Exchange
Part Number: C8519-69035-RX
Condition: Refurbished Exchange. Defective core return required; existing exchange and core-charge terms apply.
Manufacturer / Brand: HP
110 V fuser assembly for the HP LaserJet 9000, 9040 and 9050 families, including the M9040/M9050 MFP models shown below. Heat and pressure permanently bond toner to the print media.
Technical Specifications
| Listed part number | C8519-69035-RX |
|---|---|
| Component type | Fuser / fusing assembly |
| Electrical rating | 110 V |
| HP service assembly references | RG5-5750 family; C8519-69035 exchange reference |
| Function | Heats and presses the toner image onto the print media |
| Catalog part references | C8519-69035, RG5-5750-000CN, C8519-69022, C8519-69026, C8519-69031, C8519-69033, RG5-5684-000CN |
Commonly Used to Fix
These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 50.1 | Low fuser temperature HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 50.2 | Fuser warm-up service error HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 50.3 | High fuser temperature HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 50.4 | Faulty fuser HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 50.5 | Inconsistent fuser HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 50.6 | Faulty fuser HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error. |
| 13.05.00 | Fuser delivery delay; media did not reach the fuser delivery sensor in time. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Clear the jam and scraps, close the door to allow paper-path clearing, and check sensor flag movement. HP lists the print cartridge, transfer roller assembly, and then the fuser as replacement paths if the problem persists. |
| 13.06.00 | Fuser-area delivery stay jam. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Clear the indicated fuser-area jam and all scraps, then close the door to allow automatic clearing. Check the delivery flag and paper path. Replace the fuser if the diagnosed problem persists. |
| 13.20.00 | Residual media detected at startup or after opening/closing a door. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Clear paper and scraps and run a paper-path test. Check leaf-spring seating under the high-voltage power supply. Remove the duplexer to clear hidden media and check its residual-paper sensor. HP lists fuser replacement if the problem persists; several upstream and delivery sensors can also trigger this code. |
| 13.31.00 | Fuser-area jam: media reached delivery sensing but did not complete the expected fuser-jam sensor sequence. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Clear paper and scraps, close the door to allow path clearing, and check the fuser delivery/jam flags using sensor and paper-path tests. Replace the fuser if the fault persists. |
| 13.12.00 | Duplexing delay: media did not reach duplexer sensor PS2004 in time. HP LaserJet 9000/9040/9050; exact form in the earlier family manual. | Clear the jam, close the door, and run a paper-path test. If the error persists, HP lists the fuser, then duplexer and diverter. Do not confuse this with finishing-accessory 13.12 subcodes. |
| 59.3 | Abnormal fuser-motor startup HP LaserJet 9000/9040/9050; earlier manual code format. | Check and reseat fuser-motor cable connections, reseat the fuser, replace a failed fuser motor, and then replace the fuser assembly if necessary. A motor code does not by itself prove that the supplied fuser has failed. |
| 59.4 | Fuser-motor rotation error HP LaserJet 9000/9040/9050; earlier manual code format. | Check and reseat fuser-motor cable connections, reseat the fuser, replace a failed fuser motor, and then replace the fuser assembly if necessary. A motor code does not by itself prove that the supplied fuser has failed. |
| 59.10 | Motor startup error HP LaserJet M9040/M9050 MFP. | Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering. |
| 59.20 | Motor rotation error HP LaserJet M9040/M9050 MFP. | Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering. |
| 59.30 | Fuser-motor startup error HP LaserJet M9040/M9050 MFP. | Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering. |
| 59.40 | Fuser-motor rotation error HP LaserJet M9040/M9050 MFP. | Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering. |
| 0112 (service test) | Coil jam sensor solenoid abnormality; HP identifies the fuser assembly as its FRU. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error. |
| 0131 (service test) | Fusing-unit delivery sensor A abnormality; HP identifies the fuser assembly as its FRU. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error. |
| 0132 (service test) | Fusing-unit delivery sensor B abnormality; HP identifies the fuser assembly as its FRU. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error. |
| 0144 (service test) | Coil jam sensor abnormality; HP identifies the fuser assembly as its FRU. HP LaserJet 9000/9040/9050; M9040/M9050 MFP. | Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error. |
Other Symptoms This Part May Fix
- Loose toner / poor toner bonding: Check the print cartridge, suitable media and fuser mode, clean the paper path, and verify the pressure/envelope levers: down for cut-sheet media and up for envelopes. Confirm stable AC power and remove packing spacers. Replace a diagnosed faulty fuser; check the supplies status page for maintenance due.
- Horizontal smudges or white lines: Check contamination and the print cartridge first. Inspect the fuser and replace it if necessary after diagnosis. Laser/scanner or controller faults can also cause white lines.
- Vertical black or white lines: Check the cartridge and laser path. Clean a contaminated fuser entrance guide; replace a scratched or worn fuser when identified as the cause. Check fuser-mode settings for worn-film symptoms.
- Back-side contamination, repeating marks or images: Print several pages and run a cleaning page. Identify the contaminated or damaged roller using the model's repetitive-defect ruler before replacement. Check toner leaks, preprinted media, narrow-paper use and fuser mode. A complete maintenance kit may be due around the documented interval.
- Grinding or chattering in the fuser area: Remove and correctly reinstall the fuser first. Inspect the fuser drive and motor before deciding which component needs replacement.
Maintenance / Replacement Cycle
HP recommends a complete printer maintenance kit at approximately 350,000 pages. This is a system maintenance interval, not a guaranteed yield for this individual replacement fuser. Media, environment and use can require earlier service.
9000/9040/9050: CONFIGURE DEVICE > PRINT QUALITY > CREATE CLEANING PAGE. Use smooth copier-grade paper, 64?90 g/m? (17?24 lb). Follow the printed instructions: face-down in Tray 1 when installed, otherwise face-up in Tray 2. Select PROCESS CLEANING PAGE; use Letter or A4 with the long edge feeding first. M9040/M9050 MFP: Administration > Print Quality > Calibration/Cleaning > Create Cleaning Page, then follow the printed instructions.
Clean at print-cartridge replacement or when print-quality problems occur. Switch off, disconnect power and allow the fuser to cool before service. Open the left door, release the two blue locking tabs, slide the fuser out to its stop and support its weight using the blue handle. Do not confuse the locking tabs with the T-shaped envelope levers. Reset a maintenance counter only after completing the required maintenance-kit replacement.
Used In Products
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | C8519-69035-RX |
| OEM Part Number | C8519-69035 |
| Alternate Part Numbers | RG5-5750-000CN, C8519-69022, C8519-69026, C8519-69031, C8519-69033, C8519-69035, RG5-5684-000CN |
| Weight | 17.000000 |