Lj 9000/9040/9050 Fusing Assembly - Refurbished C8519-69035

All items come with standard warranty of 90 days, warranty provided by seller.

In stock

Only 10 left

Part Number
C8519-69035-RO
$145.00

Description / Lj 9000/9040/9050 Fusing Assembly - Refurbished C8519-69035

Product Information

Lj 9000/9040/9050 Fusing Assembly - Refurbished

Part Number: C8519-69035-RO

Condition: Refurbished Outright. No core return required.

Manufacturer / Brand: HP

110 V fuser assembly for the HP LaserJet 9000, 9040 and 9050 families, including the M9040/M9050 MFP models shown below. Heat and pressure permanently bond toner to the print media.

Technical Specifications

Listed part numberC8519-69035-RO
Component typeFuser / fusing assembly
Electrical rating110 V
HP service assembly referencesRG5-5750 family; C8519-69035 exchange reference
FunctionHeats and presses the toner image onto the print media
Catalog part referencesC8519-69035, RG5-5750-000CN, C8519-69022, C8519-69026, C8519-69031, C8519-69033, RG5-5684-000CN

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
50.1Low fuser temperature
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
50.2Fuser warm-up service error
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
50.3High fuser temperature
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
50.4Faulty fuser
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
50.5Inconsistent fuser
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
50.6Faulty fuser
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Turn the printer off and on. Reseat the fuser and its connections to the DC controller. If the fault persists, replace the correct model/voltage fuser. Continue with the upper cable-guide assembly, low-voltage power supply and DC controller if replacement does not resolve the error.
13.05.00Fuser delivery delay; media did not reach the fuser delivery sensor in time.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Clear the jam and scraps, close the door to allow paper-path clearing, and check sensor flag movement. HP lists the print cartridge, transfer roller assembly, and then the fuser as replacement paths if the problem persists.
13.06.00Fuser-area delivery stay jam.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Clear the indicated fuser-area jam and all scraps, then close the door to allow automatic clearing. Check the delivery flag and paper path. Replace the fuser if the diagnosed problem persists.
13.20.00Residual media detected at startup or after opening/closing a door.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Clear paper and scraps and run a paper-path test. Check leaf-spring seating under the high-voltage power supply. Remove the duplexer to clear hidden media and check its residual-paper sensor. HP lists fuser replacement if the problem persists; several upstream and delivery sensors can also trigger this code.
13.31.00Fuser-area jam: media reached delivery sensing but did not complete the expected fuser-jam sensor sequence.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Clear paper and scraps, close the door to allow path clearing, and check the fuser delivery/jam flags using sensor and paper-path tests. Replace the fuser if the fault persists.
13.12.00Duplexing delay: media did not reach duplexer sensor PS2004 in time.
HP LaserJet 9000/9040/9050; exact form in the earlier family manual.
Clear the jam, close the door, and run a paper-path test. If the error persists, HP lists the fuser, then duplexer and diverter. Do not confuse this with finishing-accessory 13.12 subcodes.
59.3Abnormal fuser-motor startup
HP LaserJet 9000/9040/9050; earlier manual code format.
Check and reseat fuser-motor cable connections, reseat the fuser, replace a failed fuser motor, and then replace the fuser assembly if necessary. A motor code does not by itself prove that the supplied fuser has failed.
59.4Fuser-motor rotation error
HP LaserJet 9000/9040/9050; earlier manual code format.
Check and reseat fuser-motor cable connections, reseat the fuser, replace a failed fuser motor, and then replace the fuser assembly if necessary. A motor code does not by itself prove that the supplied fuser has failed.
59.10Motor startup error
HP LaserJet M9040/M9050 MFP.
Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering.
59.20Motor rotation error
HP LaserJet M9040/M9050 MFP.
Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering.
59.30Fuser-motor startup error
HP LaserJet M9040/M9050 MFP.
Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering.
59.40Fuser-motor rotation error
HP LaserJet M9040/M9050 MFP.
Turn off and on. Check the indicated motor-to-DC-controller connection and reseat the specified motor. If the fault concerns cartridge motors, check the print cartridge. Run the service test; HP lists the specified motor, fuser, then DC controller as possible replacement paths. Confirm the failing component before ordering.
0112 (service test)Coil jam sensor solenoid abnormality; HP identifies the fuser assembly as its FRU.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error.
0131 (service test)Fusing-unit delivery sensor A abnormality; HP identifies the fuser assembly as its FRU.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error.
0132 (service test)Fusing-unit delivery sensor B abnormality; HP identifies the fuser assembly as its FRU.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error.
0144 (service test)Coil jam sensor abnormality; HP identifies the fuser assembly as its FRU.
HP LaserJet 9000/9040/9050; M9040/M9050 MFP.
Record the four-digit service-test result. Inspect the named integral fuser component, its flag/mechanism and connections. Correct obstruction or connection problems; replace the fuser assembly when its integral component is confirmed faulty. Use the model-specific service-test menu rather than treating this as a normal display error.

Other Symptoms This Part May Fix

  • Loose toner / poor toner bonding: Check the print cartridge, suitable media and fuser mode, clean the paper path, and verify the pressure/envelope levers: down for cut-sheet media and up for envelopes. Confirm stable AC power and remove packing spacers. Replace a diagnosed faulty fuser; check the supplies status page for maintenance due.
  • Horizontal smudges or white lines: Check contamination and the print cartridge first. Inspect the fuser and replace it if necessary after diagnosis. Laser/scanner or controller faults can also cause white lines.
  • Vertical black or white lines: Check the cartridge and laser path. Clean a contaminated fuser entrance guide; replace a scratched or worn fuser when identified as the cause. Check fuser-mode settings for worn-film symptoms.
  • Back-side contamination, repeating marks or images: Print several pages and run a cleaning page. Identify the contaminated or damaged roller using the model's repetitive-defect ruler before replacement. Check toner leaks, preprinted media, narrow-paper use and fuser mode. A complete maintenance kit may be due around the documented interval.
  • Grinding or chattering in the fuser area: Remove and correctly reinstall the fuser first. Inspect the fuser drive and motor before deciding which component needs replacement.

Maintenance / Replacement Cycle

HP recommends a complete printer maintenance kit at approximately 350,000 pages. This is a system maintenance interval, not a guaranteed yield for this individual replacement fuser. Media, environment and use can require earlier service.

9000/9040/9050: CONFIGURE DEVICE > PRINT QUALITY > CREATE CLEANING PAGE. Use smooth copier-grade paper, 64?90 g/m? (17?24 lb). Follow the printed instructions: face-down in Tray 1 when installed, otherwise face-up in Tray 2. Select PROCESS CLEANING PAGE; use Letter or A4 with the long edge feeding first. M9040/M9050 MFP: Administration > Print Quality > Calibration/Cleaning > Create Cleaning Page, then follow the printed instructions.

Clean at print-cartridge replacement or when print-quality problems occur. Switch off, disconnect power and allow the fuser to cool before service. Open the left door, release the two blue locking tabs, slide the fuser out to its stop and support its weight using the blue handle. Do not confuse the locking tabs with the T-shaped envelope levers. Reset a maintenance counter only after completing the required maintenance-kit replacement.

Used In Products

HP LaserJet 9000 series
HP LaserJet 9040 series
HP LaserJet 9050 series

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number C8519-69035-RO
OEM Part Number C8519-69035
Alternate Part Numbers RG5-5750-000CN, C8519-69022, C8519-69026, C8519-69031, C8519-69033, C8519-69035, RG5-5684-000CN
Weight 17.000000
Write Your Own Review
You're reviewing: Lj 9000/9040/9050 Fusing Assembly - Refurbished C8519-69035

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA